Interior latex paint/wall paint/wall paint/acrylic paint/latex paint

Interior Emulsion Paint/Wall Paint/Wall Coating/Acrylica Paint/Latex PaintFeatures: 1. High performance but low price2. Strong hiding power3. Easy application4. Good leveling propertyTechnical IndexesAppearanceWhite uniform viscous liquidGlossMattSolids content57.86±2%Specific gravity1.493±0.05VOC<50g/LCont

Featured Products

Interior Emulsion Paint/Wall Paint/Wall Coating/Acrylica Paint/Latex Paint
Interior Emulsion Paint/Wall Paint/Wall Coating/Acrylica Paint/Latex Paint

Features: 
1. High performance but low price
2. Strong hiding power
3. Easy application
4. Good leveling property


Technical Indexes
AppearanceWhite uniform viscous liquid
GlossMatt
Solids content57.86±2%
Specific gravity1.493±0.05
VOC<50g/L
Contrast ratio> 0.90
Alkali resistance (24 h)Coating no changes
Emulsion ratio11%~15%
Stability ( -5ºC)No Degenerating
Scrubbing resistance> 5000 times
PigmentNon-lead pigment
BinderAcrylic copolymer
SolventWater
Application methodBrush Roller Spray guns
Theoretical coverage8~10/ kg / coat
Mixing ration with water10% ~ 15% of water
Touch drying / Recoat time25 min/ 25ºC / At least 2 hours
Application environmentHumidity ≤85%, temperature ≥5ºC
Tools cleanClean the tools with water
StorageCold & dry places, avoid freezing
Packing5L=6kg 18L=22kg

Typical Painting System 
SURFACESYSTEM
Normal, Sound SurfacePrimer: Maydos Anti-alkali Primer W1210 (1 coat)
Topcoat: Maydos Interior High-Class Emulsion Wall Paint AN3006 (2 coats)




Surface Preparation

Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting. 
New Wall1. Fresh concrete must cure at least 30 days and meet application requirement before plastering. 
2. The plaster must not be too soft. Sand and dust off after dry. 
3. To resist alkalis and to obtain best results first apply one coat of Maydos anti-alkali primer W1210
Previously Painted Surface1. Remove powdery or flaking paint by scraping followed by using a suitable abrasive paper and dusting off. 
2. Fill the defects with proper filler
3. To seal powdery surfaces and to obtain best results first apply one coat of Maydos anti-alkali primer W1210
Fungus Growth Wall1. Remove all the fungus by scraping followed by using a suitable abrasive paper and dusting off
2. Wash the surface with appropriate fungus washing. Rinse with clean water and wait till dry
3. To obtain best results first apply one coat of Maydos anti-alkali primer W1210

Notes for use: 
L Mix well after paint can is opened. 
L To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can. 
L Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long
L Stop application when temperature is below 10ºC, or humidity over 85%. 
L Apply with Maydos matching primer for best performance. 
L For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label. 
Interior Emulsion Paint/Wall Paint/Wall Coating/Acrylica Paint/Latex Paint

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours