PU Building Material High and Low Temperature Stability Polyurea Elastomer for PU Protective Coating

Production Description:Polyurea is a type of compound reacted by isocyanate component (short to part A) and amide blend (short to part B). Following the high-solids coatings, waterborne coatings, radiation curable coatings, powder coatings and other pollution free coating technologies, Spray Polyurea Elastomer (referred SPU

Featured Products

Production Description:
Polyurea is a type of compound reacted by isocyanate component (short to part A) and amide blend (short to part B). Following the high-solids coatings, waterborne coatings, radiation curable coatings, powder coatings and other pollution free coating technologies, Spray Polyurea Elastomer (referred SPUA) technology is a solvent-free, pollution-free green application coating advanced technology developed to meet environmental requirements in nearly two decades abroad. It's a revolutionary leap of traditional construction technology which combines new technology new material and new procedures together. Its a breakthrough for changing the traditional anticorrosion protective concept and set up a higher standard for the material protection industry.

Characteristics:
SWD two component solvent free environment friendly pure polyurea coating is developed by SWD Urethane Co., USA in 1992. Based on the high reactivity and fast curing property, it can be sprayed forming at any bent, inclined and vertical surface without sagging. With super adhesive strength and impact resistance characteristics, the coating is flexible, impact resistant and seamless that able to completely insulate air and water and oxygen penetration. It integrated anticorrosion, waterproof, wear resistance, aging resistant performances, no pulverization and crack peel up or fall down after long- term outdoor work with alternating ambient conditions of cold, heat, rain and snow.


Physical Performance:

ColorMultiple colors as customers' need
Lusterglazed
Density1.01g/cm3
Volume solid content99% ±1%
VOC0
Recommended dry film thickness1000-3000μm
Practical coverageAllow appropriate loss rate
Overcoating methodSpecial polyurea equipment spray (imported or local support)
Flash point200ºC


Packaging:
Part A: 220kilogram per drums.
Part B: 200 kilogram per drums.


Application Scope:
Anticorrosion waterproof protection in the fields of  construction, chemical, traffic, metallurgy, power generation, aerospace, marine, shipping industries and etc.

Shelf life:
6 months (Indoor with dry and cool conditions)

Integrity declaration:
Our company guarantees the reality of the listed data. Due to the diversity and variability of the application environment, please test and verify it before use. We don't take any other responsibilities except the coating quality self and reserve the right of modifying the listed data without prior notice.


PU Construction Materials High/Low Temperature Resistance Stability Polyurea Elastomer for PU Protective CoatingPU Construction Materials High/Low Temperature Resistance Stability Polyurea Elastomer for PU Protective CoatingPU Construction Materials High/Low Temperature Resistance Stability Polyurea Elastomer for PU Protective CoatingPU Construction Materials High/Low Temperature Resistance Stability Polyurea Elastomer for PU Protective CoatingPU Construction Materials High/Low Temperature Resistance Stability Polyurea Elastomer for PU Protective Coating

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours