Antimicrobial Polyurea Coatings With Rare Earth-Doped Nano-Zinc Oxide Particles

2022-11-10 14:44:59 By : Z summer

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

The Covid-19 pandemic has demonstrated the urgent need for antiviral and antimicrobial coatings for surfaces in public spaces and healthcare environments. Recent research published in October 2021 in the journal Microbial Biotechnology has demonstrated a rapid nano-Zinc oxide doped preparation for polyurea coatings that seeks to address this issue.

Study:  Rapid preparation and antimicrobial activity of polyurea coatings with RE-Doped nano-ZnO . Image Credit: Maridav/Shutterstock.com

As demonstrated by multiple outbreaks of communicable diseases, surfaces are a source of pathogen transmission. The pressing need for rapid, effective, and non-toxic chemicals and antimicrobial and antiviral surface coatings has spurred innovative research in the fields of biotechnology, industrial chemistry, and materials science.

Surface coatings with antiviral and antimicrobial action can reduce the risk of viral transmission and kill biostructures and microorganisms upon contact. They hinder the growth of microorganisms through cellular membrane disruption. They also improve properties of the surface, such as corrosion resistance and durability.

XRD patterns of polyurea coatings with (a) nano-ZnO, (B) La/ZnO, (C) Ce/ZnO, (D) Pr/ZnO and (E) Gd/ZnO. Image Credit: Li et al., Microbial Biotechnology

According to the European Center for Disease Control and Prevention, 4 million people (about twice the population of New Mexico) globally per year acquire a healthcare-associated infection. This leads to around 37,000 deaths worldwide, with the situation especially bad in developing countries where people may not have access to proper sanitation and healthcare hygiene infrastructure. In the Western world, HCAIs are the sixth largest cause of death.

Everything is susceptible to contamination by microbes and viruses – food, equipment, surfaces and walls, and textiles are just some examples. Even regular sanitation schedules may not kill every microbe present on surfaces, so there is a pressing need to develop non-toxic surface coatings that prevent microbial growth from occurring.

In the case of Covid-19, studies have shown that the virus can stay active on frequently touched stainless steel and plastic surfaces for up to 72 hours, demonstrating the urgent need for surface coatings with antiviral properties. Antimicrobial surfaces have been used in healthcare settings for over a decade, being used to control MRSA outbreaks.

Zinc oxide (ZnO) has potent antimicrobial and antiviral properties. The use of ZnO has been explored intensively in recent years as an active ingredient in numerous antimicrobial and antiviral chemicals. Numerous toxicity studies have found that ZnO is virtually non-toxic for humans and animals but is highly effective at disrupting the cellular envelopes of microorganisms.

The microorganism-killing mechanisms of Zinc oxide can be attributed to a few properties. Zn2+ ions are released by partial dissolution of Zinc Oxide particles that disrupt further antimicrobial activity even in other microbes present, as well as direct contact with cell walls and the release of reactive oxygen species.

Increment of antibacterial effect with longer time intervals within (A) E. coli CDC-reactor and (B) Pseudomonas CDC-reactor. Image Credit: Li et al., Microbial Biotechnology

Zinc Oxide antimicrobial activity is additionally linked to particle size and concentration: smaller particles and higher concentration solutions of Zinc nanoparticles have increased antimicrobial activity. Zinc Oxide nanoparticles that are smaller in size penetrate more easily into the microbial cell membrane because of their large interfacial area. Many studies, particularly into Sars-CoV-2 recently, have elucidated similarly effective action against viruses.

The team of Li, Liu, Yao, and Narasimalu has proposed a method for rapidly preparing antimicrobial polyurea coatings by introducing rare-earth-doped nano-Zinc Oxide particles created by mixing the nanoparticles with rare earth in nitric acid.

The ZnO nanoparticles were doped with Cerium (Ce), Praseodymium (Pr), Lanthanum (LA), and Gadolinium (Gd.) Lanthanum-doped nano-Zinc Oxide particles were found to be 85% effective against P. aeruginosa and E. Coli bacterial strains.

These nanoparticles also remain 83% effective at killing microbes, even after 25 minutes of exposure to UV light. The doped nano-Zinc Oxide particles explored in the study may show improved UV light response and thermal response to temperature changes. Bioassays and surface characterization also provided evidence that surfaces retain their antimicrobial activities after repeated use.

LIVE/DEAD Biofilm imaging of polyurea coatings with (A) nano-ZnO, (B) La/ZnO, (C) Ce/ZnO, (D) Pr/ZnO, (E) Gd/ZnO, and (F) pure polyurea in E.coli CDC-reactor. Image Credit: Li et al., Microbial Biotechnology

Polyurea coatings also have high durability with less risk of peeling off surfaces. The durability of the surfaces coupled with the antimicrobial activities and environmental response of the nano-ZnO particles provide improvements to their potential for practical applications in a variety of settings and industries.

This research shows enormous potential for the control of future outbreaks and stopping the transmission of HPAIs in healthcare settings. There is also potential for their use in the food industry to provide antimicrobial packaging and fibers, improving the quality and shelf-life of foodstuffs in the future. Whilst this research is still in its infancy, it will no doubt soon be moving out of the laboratory and into the commercial sphere.

Li et al. (2021) Rapid preparation and antimicrobial activity of polyurea coatings with RE-Doped nano-ZnO [online] Microbial Biotechnology | sfamjournals.onlinelibrary.wiley.com. Available at: https://sfamjournals.onlinelibrary.wiley.com/doi/10.1111/1751-7915.13891

Tiwari, A (2020) A Guide to Antimicrobial Coatings [online] pcimag.com. Available at: https://www.pcimag.com/articles/107649-a-guide-to-antimicrobial-coatings

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Reg Davey is a freelance copywriter and editor based in Nottingham in the United Kingdom. Writing for AZoNetwork represents the coming together of various interests and fields he has been interested and involved in over the years, including Microbiology, Biomedical Sciences, and Environmental Science.

Please use one of the following formats to cite this article in your essay, paper or report:

Davey, Reginald. (2021, November 01). Antimicrobial Polyurea Coatings With Rare Earth-Doped Nano-Zinc Oxide Particles. AZoM. Retrieved on November 10, 2022 from https://www.azom.com/news.aspx?newsID=57142.

Davey, Reginald. "Antimicrobial Polyurea Coatings With Rare Earth-Doped Nano-Zinc Oxide Particles". AZoM. 10 November 2022. <https://www.azom.com/news.aspx?newsID=57142>.

Davey, Reginald. "Antimicrobial Polyurea Coatings With Rare Earth-Doped Nano-Zinc Oxide Particles". AZoM. https://www.azom.com/news.aspx?newsID=57142. (accessed November 10, 2022).

Davey, Reginald. 2021. Antimicrobial Polyurea Coatings With Rare Earth-Doped Nano-Zinc Oxide Particles. AZoM, viewed 10 November 2022, https://www.azom.com/news.aspx?newsID=57142.

It is a good journal, and the research work from Dr. Li is also very impressive!

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of AZoM.com.

Do you have a review, update or anything you would like to add to this news story?

AZoM speaks with Seokheun “Sean” Choi, a Professor in the Department of Electrical & Computer Engineering at the State University of New York. His new research details the production of a prototype circuit board printed on a sheet of paper.

Dr. Anne Meyer / Dr. Alyson Santoro

In our latest interview, AZoM spoke with Dr. Anne Meyer and Dr. Alyson Santoro who are currently collaborating as part of Nereid Biomaterials. This group is creating a new biopolymer that can be broken down by bioplastic-degrading microbes in marine environments, bringing us closer to reducing the i

This interview discusses how ELTRA, as part of Verder Scientific, produces elemental analyzers for the battery component space.

Spectrum Match is a powerful software program that allows the user to search through a custom-built spectrum library to find similar spectra.

The BitUVisc is a unique model of viscometer, that can manage highly viscous samples. It is designed to keep the samples warm throughout the entire process.

Discover the FieldLab analyzer, a new, battery-powered, portable oil lab by Spectro Scientific that allows for rapid oil testing in the field.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022